Clio Liu
13a05d0135
The PLC program from the old repo's 04-plc/, flattened into one folder and
checked against the running system.
Verified during the move:
- build.py regenerates register-map.csv byte-identically (69 points)
- polled the live PLC: the SIMULATION build is what is deployed and
running, %MW21=2 wet weather, values moving, run hours accumulating
- addresses, %MW HR1024 segmentation and %QW17/%QW7 signedness all
match the map
Corrections against the old repo:
- 10_globals.st header cited WRPS-CTL-002 (the FDS); it means CTL-003
- build.py wrote the map to its parent directory; now beside itself
- deploy/README.md was a single-file folder; now DEPLOY.md
- dropped the empty editor-devices/remote/
- README no longer claims the simulation build is uncompiled - it is
the one running
Two open items are now stated plainly rather than buried:
- none of the 20 acceptance tests in CTL-003 have ever been run
- the OpenPLC Editor lived only on the retired dev-ubuntu host, so
there is currently NO route to deploy a new program (DEPLOY.md 0)
Documents the setpoint distinction: IO_MUX seeds %MW defaults once at
first scan, operators retune them live, and that tuning exists only in
the container volume - a restart reverts it.
9 lines
No EOL
154 B
JSON
9 lines
No EOL
154 B
JSON
{
|
|
"name": "Modbus01",
|
|
"protocol": "modbus-tcp",
|
|
"modbusSlaveConfig": {
|
|
"enabled": true,
|
|
"networkInterface": "0.0.0.0",
|
|
"port": 502
|
|
}
|
|
} |