yau-plant-assistant/cube/model/process_values.yml

# =============================================================================
# process_values.yml — sampled analogue history.
#
# SOURCE: fixture.process_value_history while USE_FIXTURES=true; the agreed imh
# process value table from Phase 4.
#
# THE THING THAT WILL BITE WHEN imh IS CONNECTED: CI Server historises with a
# deadband, so real samples are IRREGULAR. The fixtures are regular 1-minute
# samples. Any measure that averages rows rather than time-weighting them will
# look correct on fixtures and be wrong on imh - a flat period compresses to
# one row and a noisy period to hundreds, so a plain avg is weighted by how
# interesting the signal was. avg_value below is a plain average and is
# documented as an approximation; time_weighted_avg is the one to trust, and it
# must be re-verified against imh at the Phase 5 gate.
#
# SENTINELS: PS_STN_TIME_TO_SPILL_WEIR and PS_STN_TIME_TO_LSHH use 32767 to
# mean "drawing down or holding" - it is not a duration. Every measure here
# excludes it. Do not remove that filter to make a number look tidier.
#
# QUALITY: rows with quality other than GOOD are excluded from every measure.
# A BAD sample from a failed transmitter is not a low reading.
#
# UNITS: whatever the historian stores, which is not always what the PLC works
# in. Wet well level is historised as percent of the spill weir crest (raw mm
# divided by 60): 100.0 % = 6000 mm. See db/seed/tags.csv for every conversion.
#
# DEFERRED DEFECT - THE LEVEL TAG NAME DOES NOT AGREE WITH THE REFERENCE DATA.
# The history is keyed PS_STN_WET_WELL_LEVEL, hardcoded below in
# seconds_above_high_level_alarm and seconds_above_lshh. db/seed/tags.csv
# carries that name only as an ALIAS of LIT-101, so public.tags has no row with
# that tag_id and a tag-level lookup for WW-101 matches ZERO history rows -
# surfacing as "no records found", which an operator cannot distinguish from
# there genuinely being no data. Filtering by equipment_id works, so whether a
# level question fails depends on the path the agent takes.
#
# Unfixed on purpose: which name is correct is a question for the WRPS register
# map and for imh, not something to guess against fixtures. See Phase 4,
# "Deferred from Phase 5", finding (a) in BUILD-AI-CONTAINERS.md, and eval case
# H26. Fix the seed, these hardcoded names and db/002_fixtures.sql together.
# =============================================================================

cubes:
  - name: process_values
    # NOT sql_table, because time_weighted_avg needs to know how long each
    # sample stood, and that is a window function - which Postgres will not
    # allow inside an aggregate. So the gap is computed once here, per tag, and
    # the measure just sums it. The alternative (LEAD inside SUM) is what this
    # file used to say, and it failed every query outright on lin001.
    #
    # The last sample of each tag gets a NULL duration, which is correct: how
    # long it stood is not yet known, and SUM skips it.
    #
    # AT PHASE 4 this window runs over imh, not over 130k fixture rows next
    # door. Check the plan before trusting it - if it scans the whole history
    # per query, push the LEAD into a pre-aggregation or a derived table.
    sql: >
      SELECT
        sample_time,
        tag_id,
        equipment_id,
        value,
        engineering_unit,
        quality,
        is_fixture,
        EXTRACT(EPOCH FROM (
          LEAD(sample_time) OVER (PARTITION BY tag_id ORDER BY sample_time)
          - sample_time
        )) AS sample_duration_seconds
      FROM fixture.process_value_history    -- -> imh PV table at Phase 4
    description: >
      Sampled analogue history - wet well level, inflow, discharge flow, drive
      speed, run hours. This is what makes an advisory question answerable with
      evidence; you cannot answer a flow question from alarms.

    joins:
      - name: equipment
        sql: "{CUBE}.equipment_id = {equipment}.equipment_id"
        relationship: many_to_one

    dimensions:
      - name: id
        sql: "{CUBE}.tag_id || '@' || {CUBE}.sample_time"
        type: string
        primary_key: true

      - name: sample_time
        sql: sample_time
        type: time
        description: Stored UTC, presented in SITE_TIMEZONE. Converted once, here.

      - name: tag_id
        sql: tag_id
        type: string

      - name: equipment_id
        sql: equipment_id
        type: string

      - name: engineering_unit
        sql: engineering_unit
        type: string
        description: >
          Always report this with the number. A level of 86.7 is a percentage
          of the weir crest, not a metre reading.

      - name: quality
        sql: quality
        type: string

      - name: is_fixture
        sql: is_fixture
        type: boolean

    measures:
      - name: sample_count
        type: count
        filters:
          - sql: "{CUBE}.quality = 'GOOD' AND {CUBE}.value <> 32767"

      - name: avg_value
        sql: value
        type: avg
        filters:
          - sql: "{CUBE}.quality = 'GOOD' AND {CUBE}.value <> 32767"
        description: >
          APPROXIMATION. Plain average of samples. Correct on the regular
          fixture data; biased on deadband-compressed imh data. Prefer
          time_weighted_avg for anything an engineer will check.

      - name: time_weighted_avg
        sql: >
          SUM(CASE WHEN {CUBE}.quality = 'GOOD' AND {CUBE}.value <> 32767
                   THEN {CUBE}.value * {CUBE}.sample_duration_seconds END)
          / NULLIF(SUM(CASE WHEN {CUBE}.quality = 'GOOD' AND {CUBE}.value <> 32767
                            THEN {CUBE}.sample_duration_seconds END), 0)
        type: number
        description: >
          Time-weighted average - each sample weighted by how long it stood,
          from sample_duration_seconds in the cube's source query above. This
          is the honest average on deadband-compressed history, and on regular
          fixture data it agrees with avg_value to a rounding error - which is
          exactly why it must be re-verified against imh, where the two will
          NOT agree. Bad and sentinel samples are excluded in the CASE rather
          than by a measure filter, for the same reason as p95_value below.

      - name: max_value
        sql: value
        type: max
        filters:
          - sql: "{CUBE}.quality = 'GOOD' AND {CUBE}.value <> 32767"

      - name: min_value
        sql: value
        type: min
        filters:
          - sql: "{CUBE}.quality = 'GOOD' AND {CUBE}.value <> 32767"

      - name: p95_value
        # The quality filter is INSIDE the ordered-set aggregate on purpose.
        # A Cube measure `filters:` block cannot be applied to PERCENTILE_CONT
        # - it lands outside the aggregate and Postgres rejects the query with
        # "column process_values.quality must appear in the GROUP BY clause".
        # PERCENTILE_CONT ignores the NULLs the CASE produces.
        sql: >
          PERCENTILE_CONT(0.95) WITHIN GROUP (
            ORDER BY CASE WHEN {CUBE}.quality = 'GOOD' AND {CUBE}.value <> 32767
                          THEN {CUBE}.value END)
        type: number
        description: >
          95th percentile. More useful than max for "how high does it normally
          get", because max is one sample and often a transient.

      - name: seconds_above_high_level_alarm
        sql: >
          SUM(CASE WHEN {CUBE}.tag_id = 'PS_STN_WET_WELL_LEVEL'
                    AND {CUBE}.value >= 86.7 THEN 60 ELSE 0 END)
        type: number
        description: >
          Seconds the wet well spent above the high level alarm setpoint
          (86.7 % = 5200 mm, the %MW8 default). ASSUMES A 60 SECOND SAMPLE
          INTERVAL, true of the fixtures and NOT true of imh. When imh is
          connected this must be rewritten to sum actual sample gaps - it is on
          the Phase 5 gate list for exactly that reason. If the setpoint itself
          was changed during the window (PS_STN_HIGH_LEVEL_ALARM_SP), this
          measure is wrong and the answer must say so.

      - name: seconds_above_lshh
        sql: >
          SUM(CASE WHEN {CUBE}.tag_id = 'PS_STN_WET_WELL_LEVEL'
                    AND {CUBE}.value >= 91.7 THEN 60 ELSE 0 END)
        type: number
        description: >
          Seconds above LSHH (91.7 % = 5500 mm). Same 60 second assumption as
          above. Any non-zero value here is worth reporting explicitly.

    pre_aggregations:
      - name: pv_by_hour
        measures: [avg_value, max_value, min_value, sample_count]
        dimensions: [tag_id, equipment_id, engineering_unit]
        time_dimension: sample_time
        granularity: hour
        partition_granularity: month
        refresh_key:
          every: 10 minutes
        build_range_start:
          sql: "SELECT now() - interval '180 days'"
        build_range_end:
          sql: "SELECT now()"