cliu/ci-server-engineer
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

Close ISS-018, ISS-053, ISS-054 confirmed by the user

Browse source 
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
Clio Liu 2026-10-01 19:52:07 +10:00
parent 58a7ed826e
commit 169085deff
1 changed files with 3 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
knowledge/issues.md
View file

@ -37,7 +37,7 @@ development system (see "Test system" in `progress.md`); they do not exist on ot
| ISS-015 | 2026-09-30 | Setup File Editor | In `wfla_display.sup` the seven main keywords (`RELATION_LOCATION` … `TIMER_INTERVAL`) come before the only tab line `!TAB = Debug`. By IM 36K10R20 §3.1, keywords before the first `!TAB` are not shown, yet IM 36K10R10 §4.4.1 shows them on a *General* tab. What the editor really shows is unknown. | closed | Closed 2026-09-30 (checked in the Setup File Editor by the user; installed software is the reference). The editor shows keywords placed before the first `!TAB` on a **General** tab, followed by the defined tabs: `wfla_display.sup` shows *General* (all 7 fields, values as in the file) and *Debug*. The manual's statement that such keywords are ignored does not hold in R1.03. | `knowledge/manuals/IM36K10R20-01EN.md` §3; `knowledge/manuals/IM36K10R10-01EN.md` §4; `.claude/skills/portal-setup/tasks/change-setup-file.md` |
| ISS-016 | 2026-09-30 | Setup File Editor | The R1.03 editor has features IM 36K10R20 §2 does not describe: a *Templates* tab next to *Setup Files*; a *Status* column in the file list (e.g. "Default"); *Undo Field* and *Reset Field* buttons on the edit form besides OK/Cancel/Help; a status bar with the selected file's description and the time. | closed | Installed software is the reference (user decision). 2026-09-30, tested on `wfla_display.sup` (`DUR_QUEUE_SIZE` 1000 → 2000): clicking **OK writes the file immediately** (only the active line changed; the manual says OK keeps the change in memory until Exit). Status becomes **Changed** when an active value differs from the file's `!DEFAULT` block; the changed field's label turns **blue**. *Reset Field* is enabled when the cursor is in a changed field; *Reset Field* + *OK* put the value back to the `!DEFAULT` value (2000 → 1000) and wrote the file at once (16:22:28); the rest of the file was unchanged. Still to find: what *Templates* holds and what *Undo Field* does. Closed 2026-10-01 (confirmed by user). | `knowledge/manuals/IM36K10R20-01EN.md` §2; `.claude/skills/portal-setup/tasks/change-setup-file.md` |
| ISS-017 | 2026-09-30 | CI Portal setup files | IM 36K10R10 §4 says the logon method is the one user-interface setting normally changed, but the R1.03 `jwuiisg.sup` *Information* tab says the login method and login control settings have moved to `dssana.sup` (authentication and authorization). `dssana.sup` is not described in R10. | closed | Installed software is the reference. 2026-09-30: `dssana.sup` ("Authentication and authorization setup") has tabs General, User Interfaces, Clients System Trust, Login control (`LOGIN_METHOD = <client>, <user interface>, <method>, …`), Active Directory, Single Sign On, Password rules, Logging. Manuals mentioning it: IM 36K01A50 (5×), 36K10C10 (6×), 36K10J40 (13×), 36K10L45 (2×), 36K10L50 (3×). Cover it in phase 5 (C10) and phase 13 (J40). 2026-09-30: login methods (Automatic, Manual CI Server, Manual OS, No, SSO, Deny) now summarized from C10 §2.2 in `knowledge/manuals/IM36K10C10-01EN.md`; AD/SSO details remain for J40. Closed 2026-10-01 (confirmed by user). | `knowledge/manuals/IM36K10R10-01EN.md` §4; `.claude/skills/portal-setup/SKILL.md` |
| ISS-018 | 2026-09-30 | Authorization (`dssana.sup`) | IM 36K10C10 §2.2 says the *No* login method applies the user profile `FT_NO_LOGIN`; the installed `dssana.sup` names `CI_NO_LOGIN` (and `CI_NO_LOGIN_OPCUAS` for anonymous OPC UA) as the no-login profile. `USER_DF` on the test system has `CI_NO_LOGIN_OPCUAS` but no `CI_NO_LOGIN`. | open | Installed software is the reference: use `CI_NO_LOGIN`. Answered in phase 13 (2026-10-01): the `dssana.sup` help says that when no user with the no-login profile name exists, **full authorization** is used (not "no profile" as IM 36K10C10 says). Verified indirectly: `Quickload Utility` has *No* login with an empty profile, and every `dssqld` change is recorded in the audit trail as user `FULL AUTHORIZATION`. Documented in `authorization/tasks/login-methods.md` (create a restricted `CI_NO_LOGIN` user before using *No* login). Ready to close. | `knowledge/manuals/IM36K10C10-01EN.md` §2 |
| ISS-018 | 2026-09-30 | Authorization (`dssana.sup`) | IM 36K10C10 §2.2 says the *No* login method applies the user profile `FT_NO_LOGIN`; the installed `dssana.sup` names `CI_NO_LOGIN` (and `CI_NO_LOGIN_OPCUAS` for anonymous OPC UA) as the no-login profile. `USER_DF` on the test system has `CI_NO_LOGIN_OPCUAS` but no `CI_NO_LOGIN`. | closed | Installed software is the reference: use `CI_NO_LOGIN`. Answered in phase 13 (2026-10-01): the `dssana.sup` help says that when no user with the no-login profile name exists, **full authorization** is used (not "no profile" as IM 36K10C10 says). Verified indirectly: `Quickload Utility` has *No* login with an empty profile, and every `dssqld` change is recorded in the audit trail as user `FULL AUTHORIZATION`. Documented in `authorization/tasks/login-methods.md` (create a restricted `CI_NO_LOGIN` user before using *No* login). Closed 2026-10-01 (confirmed by user). | `knowledge/manuals/IM36K10C10-01EN.md` §2 |
| ISS-019 | 2026-09-30 | ITEM (string items) | Maximum string item length differs by source: IM 36K10C10 §3.3.4 says default 80, max 100; the Tutorial summary says up to 168 without audit; the data dictionary (`dssqld -f`) gives `ITEM_DF.STRING_LENGTH` range 1–200, default 80. | closed | Tested 2026-09-30 on CI-Eng-Sample (`dssqld -i`, `itmval -p/-g`, non-elevated): `STRING_LENGTH` 100, 168 and 200 load with or without `AUDIT_INFO`; 201 fails with `DSS-E-VAL_RANGE`. An item holds **length − 1** characters: a 99-character value in a length-100 item is stored with status 9 NORMAL; longer values are cut to length − 1 with status **12 OVERRANGED** (100 → 99, 200 → 199, 201 → 199). So the data dictionary (1–200) is right. Test items removed. Closed 2026-09-30 (confirmed by user). | `knowledge/manuals/IM36K10C10-01EN.md` §3; `knowledge/manuals/IM36K10G10-01EN.md` (items); `.claude/skills/item-engineering/SKILL.md` |
| ISS-020 | 2026-09-30 | DATABASE (`dssqld`) | `dssqld -i "<long absolute path>\user.qli"` failed with `CRL-E-ENOENT` / `DSSQ-E-QLD_FILOPN`: the path in the message was cut after 79 characters (`…\73b3559a-12.`). A relative file name from the same folder works. Similar to the `intspawn` path limit (ISS-007). | closed | Tested 2026-10-01: the limit is **79 characters** for the whole path. An input file of 80–81 characters gives `DSSQ-E-Q_QLIEXT` (the name is cut, e.g. `….ql`), 85+ gives `CRL-E-ENOENT`. An `-e` output path of 80+ characters gives **no error**, but no file appears under the given name. Documented: keep paths ≤ 79 characters, or `cd` to the folder and use relative names. Close when the user confirms. Closed 2026-10-01 (confirmed by user). | `.claude/skills/system-management/tasks/load-remove-records.md`; `.claude/skills/system-management/tasks/export-dataset.md` |
| ISS-021 | 2026-09-30 | EQUIPMENT (`eqpiostat`) | IM 36K10L40 §2 says `eqpiostat` stores hourly I/O statistics per station line in "history group STATION_STAT". On the test system `eqpiostat` runs (started by `equipment_start.cmd` on the host node) and `STATION_STAT` is a dataset, but `dssqld -e` returned 0 records, also with filters on `TIME_STAMP` and `STATION` (AID Modbus stations, which send requests). | closed | Answered 2026-10-01: with `CIENG_PLC` communicating (Modbus slave mirror running), `STATION_STAT` holds one record per hour per station line (10 records since 30-09-2026 18:00; e.g. `TIMESPAN` 831 s, `SENDS`/`GOODANS` 1560/1560, no errors). The earlier empty export had no communicating station. Closed 2026-10-01 (confirmed by user). | `knowledge/manuals/IM36K10L40-01EN.md` §2 |
@ -72,5 +72,5 @@ development system (see "Test system" in `progress.md`); they do not exist on ot
| ISS-050 | 2026-10-01 | AUDIT (classifier `STORAGE`) | Setting `AUDIT_EVENT_CLAS_DF.STORAGE` = 0 for `DATASET.NULL-ATTR.MODIFY.ENT-ENG-MOD` at 17:01:12 did not stop the next `dssqld -m ITEM_VAL` change from being stored (17:01:12.573). IM 36K10L25 §3.2 explains a per-process cache refreshed every `ECL_REFRESH` s (default 1800); the notifier here is `DSSSDA`, so the change should apply within 30 minutes. | closed | Re-tested: at 17:32:18 (after the 30-minute refresh) the same change was **not** stored, so the flag works with a delay. Set back to 1 at 17:32; the next change was still not stored (the cache works in both directions). Documented: allow up to `ECL_REFRESH` (1800 s) or restart CI Server. Close when the user confirms. Closed 2026-10-01 (confirmed by user). | `.claude/skills/audit-trail/tasks/configure-audit.md` §1; `knowledge/manuals/IM36K10L25-01EN.md` §3 |
| ISS-051 | 2026-10-01 | AUDIT (manual vs installed) | Differences between IM 36K10L25 and R1.03.00: (1) App. 1 lists subject `F/T-SYSTEM`, the installed classifiers use `CI-SERVER` (logins) and also `EAL OPERATION` (subject and action) and source `VIA-OPC-UAS`, not in the manual; 463 classifiers installed. (2) App. 1 explanations of `SHELVE` and `UN-SHELVE` are swapped. (3) `QUESIZE`: manual default and maximum 200 kB, `adtsys.sup` help default 10 kB, minimum 10 (file sets 200). (4) `TIMEFMT` default: manual `DD/MM/YY hh:mm:ss.ppp`, `adtsys.sup` help without `.ppp`; `ADTLOG` output shows milliseconds (manual right). (5) `dssqld` changes are recorded with source `ENT-ENG-MOD`, not `QUICKLOAD`. (6) The selection expression language is not described in the manual; the compiler listing gives the words and operators (no `LIKE`). (7) `ADT` group lifetime 52 weeks on the test system vs 2 days default when `ADTSTO` creates it (§2.1.1). | closed | Documented in the L25 summary and the `audit-trail` skill. Close when the user confirms. Closed 2026-10-01 (confirmed by user). | `knowledge/manuals/IM36K10L25-01EN.md`; `.claude/skills/audit-trail/tasks/*.md` |
| ISS-052 | 2026-10-01 | GRAPHICS (stale item id) | The HTML display `CIENG_Tank` showed **0** in its number field on `CI-Eng-Sample.TANK1.LEVEL` (live value 50) and the popup `ITM-E-NO_MAIN, No main item found`, in a fresh session after a CI Server restart. The display XML stores `<itemName>` **and** `<itemId>1.1.268.0.0.1.1.7</itemId>` from when it was built; after today's sample reloads the item has `ID_NUMBER` 357. Phase 10 had seen live values after a reload, so the id is not always used, but here it broke the field. | closed | Fixed in the sample: removed the `<itemId>` line from `displays/CIENG_Tank.xml`, redeployed; the field shows 50 and the popup is gone (binding by name). Documented in `create-display.md`. Close when the user confirms. Closed 2026-10-01 (confirmed by user). | `examples/CI-Eng-Sample/displays/CIENG_Tank.xml`; `.claude/skills/graphics/tasks/create-display.md`; `.claude/skills/graphics/tasks/deploy-displays.md` |
| ISS-053 | 2026-10-01 | HAC (manual vs installed) | IM 36K10J20 vs the installed `hac.sup`/scripts: (1) *Start in manual mode*: §1.3 says HAC starts in manual by default, §1.5 and the `hac.sup` help say automatic; the installed template sets `START_MANUAL = YES`. (2) `MAXOPNDB` default: help 500, manual 50 (§1.5) and 5 (§4.8). (3) `QUESIZE` default: help 100 K, manual 2000 K (file sets 2000). (4) §4.5 says `tls\com` and `tls\exe` cannot be mirrored, but the template mirrors `12 COM` (excluding `ci_command.cmd`). (5) §4.4 says the critical processes are already in the queue/CPU check lists; the installed file has no `MAX_QUEUE`/`MAX_CPU`/`INACTIVE` lines. (6) `hacw_standby` uses `TLS_LST_PATH` when `TLS_BACKUP_PATH` is unset (manual: `TLS_ALLUSERS_PATH`). (7) The template `IP_DEVICE` is `localhost` (priority 0), which §1.3 says to remove after testing. (8) HMI properties have `communicationInterval`/`Timeout`/`RetryCount`, not in the manual. | open | Installed software is the reference (standing user decision); documented in the J20 summary §5 and the `high-availability` skill. Not testable on one server. Close when the user confirms. | `knowledge/manuals/IM36K10J20-01EN.md`; `.claude/skills/high-availability/tasks/*.md` |
| ISS-054 | 2026-10-01 | AD (manual vs installed) | IM 36K10J40 vs the installed `dssana.sup`: the *Active Directory* tab has keywords the manual does not describe — `AD_SERVER`, `AD_SERVER_BACKUP` (host[:port], 389/636), `AD_SECURE` (LDAPS; installed `NO`, help says default yes), `AD_ACCESS_USER`/`AD_ACCESS_PASSWORD` (blank = the CI Server service account). The manual's *Profile priority* is `USER_DF.MERGE_PRIORITY`; *Directory group* is `DIRECTORY_GROUP` (68 characters). The SSO keytab path is given as `%TLS_WAP_PATH%\webapps\auth\WEB-INF` (§2.5.1) and `%TLS_ALLUSERS_PATH%\wap\webapps\auth\WEB-INF` (§3.4.3) — the same folder on the test system. | open | Installed software is the reference; documented in the J40 summary §5 and `authorization/tasks/active-directory.md`. Not testable without a domain. Close when the user confirms. | `knowledge/manuals/IM36K10J40-01EN.md`; `.claude/skills/authorization/tasks/active-directory.md` |
| ISS-053 | 2026-10-01 | HAC (manual vs installed) | IM 36K10J20 vs the installed `hac.sup`/scripts: (1) *Start in manual mode*: §1.3 says HAC starts in manual by default, §1.5 and the `hac.sup` help say automatic; the installed template sets `START_MANUAL = YES`. (2) `MAXOPNDB` default: help 500, manual 50 (§1.5) and 5 (§4.8). (3) `QUESIZE` default: help 100 K, manual 2000 K (file sets 2000). (4) §4.5 says `tls\com` and `tls\exe` cannot be mirrored, but the template mirrors `12 COM` (excluding `ci_command.cmd`). (5) §4.4 says the critical processes are already in the queue/CPU check lists; the installed file has no `MAX_QUEUE`/`MAX_CPU`/`INACTIVE` lines. (6) `hacw_standby` uses `TLS_LST_PATH` when `TLS_BACKUP_PATH` is unset (manual: `TLS_ALLUSERS_PATH`). (7) The template `IP_DEVICE` is `localhost` (priority 0), which §1.3 says to remove after testing. (8) HMI properties have `communicationInterval`/`Timeout`/`RetryCount`, not in the manual. | closed | Installed software is the reference (standing user decision); documented in the J20 summary §5 and the `high-availability` skill. Not testable on one server. Closed 2026-10-01 (confirmed by user). | `knowledge/manuals/IM36K10J20-01EN.md`; `.claude/skills/high-availability/tasks/*.md` |
| ISS-054 | 2026-10-01 | AD (manual vs installed) | IM 36K10J40 vs the installed `dssana.sup`: the *Active Directory* tab has keywords the manual does not describe — `AD_SERVER`, `AD_SERVER_BACKUP` (host[:port], 389/636), `AD_SECURE` (LDAPS; installed `NO`, help says default yes), `AD_ACCESS_USER`/`AD_ACCESS_PASSWORD` (blank = the CI Server service account). The manual's *Profile priority* is `USER_DF.MERGE_PRIORITY`; *Directory group* is `DIRECTORY_GROUP` (68 characters). The SSO keytab path is given as `%TLS_WAP_PATH%\webapps\auth\WEB-INF` (§2.5.1) and `%TLS_ALLUSERS_PATH%\wap\webapps\auth\WEB-INF` (§3.4.3) — the same folder on the test system. | closed | Installed software is the reference; documented in the J40 summary §5 and `authorization/tasks/active-directory.md`. Not testable without a domain. Closed 2026-10-01 (confirmed by user). | `knowledge/manuals/IM36K10J40-01EN.md`; `.claude/skills/authorization/tasks/active-directory.md` |