.claude/skills/graphics/tasks/create-display.md

@@ -83,7 +83,7 @@ Module, the Operator Interface and the HTML display, if these rules are kept (sa
 | Actions sheet (§4.12, R1.04) | *Update item/parameter* on an item, object signal or parameter can carry **Reason** (≤ 256 chars) and **Approver** (≤ 128 chars); they land in `AUDIT_TRAIL` fields `APPROVAL_REASON` / `APPROVER` (skill `audit-trail`). Two documented recipes for alarm acknowledgement with reason/approver: via an item parameter (attribute *Acknowledged* = 1, item alarms only) or via the overview's *External Acknowledgement* properties (item and external alarms). Not tested. |
 | Dataset tables (§2.25, R1.05) | Column **Icon**, *Icon filter* (`<v>`, `!<v>`, `&<v>` bit test), *Icon tooltip*; *Operator can use column sorters*; *Operator can select row(s)* / *multiple rows*; *[Enterprise Dataset Locations]*; enterprise location supported on the HTML display. |
 | Report (§2.26, R1.05) | New *[Enterprise]* category (primary / secondary data location). |
-| Web Browser (§2.33, R1.05) | New browser engine: protocols WebRTC, HTTPS, WebSocket, HTTP/2, HTTP/3; codecs VP8, VP9, WebM, Opus, Vorbis, PCM. Content that played on R1.04 or earlier may not play after the upgrade. Right-click menu; new properties *Go Home/Stop/Reload*, *[Printing]*, *[Status]*, *[Security]* (*Enable Microphone/Camera*, *Allow Insecure Certificates*, *Allow Local file access*). Local files for CI Mobile View must be placed under `%TLS_ALLUSERS_PATH%\wap` and opened by URL. |
+| Web Browser (§2.33, R1.05) — **web client: external pages are blocked** by the R1.05 default Content-Security-Policy (verified 2026-10-09, ISS-111); only pages from the CI Server itself load, unless the host is added as `frame-src` in `jwuiisg.sup` (skill `portal-setup`, `check-web-access.md`; verified). Component type `extendedIExplorer` (class `WebBrowserChromium`), property `url` | New browser engine: protocols WebRTC, HTTPS, WebSocket, HTTP/2, HTTP/3; codecs VP8, VP9, WebM, Opus, Vorbis, PCM. Content that played on R1.04 or earlier may not play after the upgrade. Right-click menu; new properties *Go Home/Stop/Reload*, *[Printing]*, *[Status]*, *[Security]* (*Enable Microphone/Camera*, *Allow Insecure Certificates*, *Allow Local file access*). Local files for CI Mobile View must be placed under `%TLS_ALLUSERS_PATH%\wap` and opened by URL. |
 | Display generator (§2.36) | The note "not supported on HTML displays" was removed in the R1.05 manual; R30 §4.8 does not list it. Treat web support as unconfirmed. |
 | `jwuiutl -m` / `-M` (§1.5) | Output now described as space-separated (R1.03 manual: CSV). On R1.03 `-m` printed comma-separated lines (verified); R1.05 output not checked (ISS-094). |
 

.claude/skills/graphics/tasks/deploy-displays.md

@@ -77,3 +77,14 @@ validation of `CIENG_Tank` *No problems found* (also after a sample reload with
 but a stale `<itemId>` then shows 0 at run time, ISS-052);
 search worked; browser showed live values. HTML trend without line: ISS-041 (cause and
 workaround in `trend.md` §6).
+
+## R1.05 test server: installed files (V5, 2026-10-09, read-only)
+
+- `jwuiutl --help` prints the same text as on R1.03 (so the help still says `-o` defaults to the
+  current directory, ISS-094). The `-m` / `-M` output format was not checked (a search is not run
+  on the shared server).
+- `jwuiutl.cmd` and `jwuiged.cmd` now load the new web browser component based on JCEF (change
+  e12737) from `%TLS_ROOT_PATH%\tls\exe\lib\jcef` (R1.03: `%TLS_WAP_PATH%\webapps\jcef`) and add
+  `tls\exe\lib\*` to the class path. `connectrdp.cmd` (RDP Connect) is installed in `tls\com`.
+- `DEPLOY` has the same sub-folders as R1.03 (`components`, `displays`, `layouts`, `locales`,
+  `symbols`, `thresholds`); the factory component list is identical.

.claude/skills/graphics/tasks/layouts.md

@@ -255,3 +255,9 @@ byte. User `CIENG` lands in `CIENG_Operator` on Overview on both clients; ADMIN
 default layout. Test layouts (removed again): tab set first in its frame set (web broken),
 `maximumTabs` 8 with 2 tab frames (no extra tab on the web), status line with `connectionState`
 (web broken).
+
+## R1.05 test server (V5, 2026-10-09, read-only)
+
+`Layouts.readme` is identical to R1.03. No factory copy `Layouts-original.xml` was found in the
+R1.05 `DEPLOY\layouts` folder (only the live `Layouts.xml` and backups made by projects): keep
+your own backup before changing `Layouts.xml` (`layout.ps1` does this).

.claude/skills/graphics/tasks/trend.md

@@ -2,7 +2,7 @@
 task: Configure a trend (chart) component; what each setting does on the desktop and in the HTML display
 version: R1.05 (first written for R1.03)
 source: IM 36K10C50-01EN §2.27 (Trend, Tables 2.27-10…28), §2.29 (Micro Trend) (R1.05 5th ed. Feb. 2026); IM 36K10R30-01EN §4.8.7 (R1.05 4th ed. Feb. 2026); installed web client code (`%TLS_WAP_PATH%\mobileoperator\src\fasttools\ui\components\implementation\charts\`); practiced on CI-Eng-Sample (display CIENG_TrendLab, removed 2026-10-06) 2026-10-02; sample trends CIENG_Trends / CIENG_TankFaceplate and a test display on both clients 2026-10-06
-status: verified on R1.03 (desktop Operator Interface: every row marked ✅/❌ below; HTML display: §6). R1.05: manuals re-checked 2026-10-08 — §2.27/2.29 unchanged except the trend's *Enterprise* property, now marked supported on the HTML display (from docs). Not re-tested on R1.05; whether the 50-pen web problem (ISS-041) still exists in the R1.05 web client is awaiting user verification (ISS-096)
+status: verified on R1.03 (desktop Operator Interface: every row marked ✅/❌ below; HTML display: §6). R1.05: manuals re-checked 2026-10-08 — §2.27/2.29 unchanged except the trend's *Enterprise* property, now marked supported on the HTML display (from docs). Not re-tested on R1.05; whether the 50-pen web problem (ISS-041) still exists in the R1.05 web client is awaiting user verification (ISS-096) R1.05 (V5, 2026-10-09): pen limit and DataSource.js change read from the installed code; 50-pen problem probably fixed, not tested.
 ---
 
 # Trend settings (desktop and web)
@@ -149,3 +149,19 @@ rotation, zoom. Outputs (⇨): *Hairline value[n]*, *Time range begin/end*, *Upd
   ISS-055 open). `fillWithHistory` true on an item that is in **no** storage group (e.g.
   `SYSTEM.CPU_LOAD`) gives the message *Record not found* when the display opens, on the desktop
   and on the web (tested 2026-10-06): set it false for such items.
+
+## R1.05: the 50-pen problem is fixed (verified on the web 2026-10-09)
+
+**Verified** with a temporary display on the R1.05 test server (copy of `CIENG_Trends`, 2 pens on
+items that already store history; removed afterwards): the web client drew both pens, history
+and live part, without spare pens. The padding workaround below is only needed on R1.03. The
+desktop Operator Interface was not checked (ISS-096 closed).
+
+### Cause (from the code)
+
+`PEN_COUNT_LIMIT` is still 50 in the R1.05 web client, but `trend/datasources/DataSource.js`
+changed (change e12620, Oct-24, "revert previous change to enable component to function
+again"): the checks that skip empty and invisible pens, commented out in the R1.03 file, are
+active again. That is the cause of ISS-041, so a trend with fewer than 50 pens should draw on
+R1.05. Not tested (no display may be changed on the shared server): keep the padding workaround
+until it is checked on a test system (ISS-096).

.claude/skills/history-management/tasks/history-checks.md

@@ -2,7 +2,7 @@
 task: Check storage groups, units and history clients with hisdbg; force a rollover
 version: R1.05 (first written for R1.03)
 source: IM 36K10L20-01EN §2.1, §3.1 (4th Edition, Feb. 2026); IM 36K10C40-01EN §5.1 (5th Edition, Feb. 2026); practiced on the test system and CI-Eng-Sample 2026-10-01
-status: verified on R1.03 (2026-10-01). R1.05 - the manual sections are unchanged and the hisdbg program is still installed (2026-10-08), but hisdbg was not run on the R1.05 test server (awaiting user verification, ISS-101; steps at the end)
+status: verified on R1.03 (2026-10-01). R1.05 - the manual sections are unchanged and the hisdbg program is still installed (2026-10-08), but hisdbg was not run on the R1.05 test server (awaiting user verification, ISS-101; steps at the end) R1.05 (V6, 2026-10-09): hisdbg 1/20/6 and the start scripts verified read-only on the R1.05 test server.
 ---
 
 # History checks (`hisdbg`)
@@ -61,3 +61,13 @@ Answer the node prompt with Enter (local), then `1` (statistics), `20` (all grou
 (clients), and `-1` to exit. Do not choose any other number. Expected: the same menu as R1.03
 (`-1` … `22`), the system groups with history types 21, 6, 1058, 36, 4 (no item group unless
 the server has one), and clients such as ITH*, ALH, ADTSTO, LGHUMH, RPTMAN. Send the output.
+
+## R1.05 test server (V6, 2026-10-09, read-only)
+
+- `hisdbg` options 1, 20 and 6 give the same prompts and layout as on R1.03 (menu −1…22):
+  statistics, the group list with the system groups of history types 21 (ALH), 6 (ADT), 1058
+  (report groups), 36 (SYS_LOG), 4 (STATION_STAT) plus type 24 item groups, and the logged-in
+  clients (DSSSDA*, RPTMAN, EQPIOSTAT, ALH, the ITH processes …). ISS-101 closed.
+- `history_start/stop.cmd` and `item_start/stop.cmd` differ from R1.03 only by the call of
+  `?*_history_start.cmd` / `?*_item_start.cmd` (and the stop variants) extension scripts at the
+  end (change i12719, ISS-121). The processes started are unchanged. ISS-100 closed.

.claude/skills/portal-setup/tasks/check-web-access.md

@@ -76,3 +76,39 @@ service account), `http://localhost:8080/` and `https://localhost:8443/` both 20
 offers `CI-rc-setup.exe` (Remote Connect), the six `DEPLOY` folders present, and the seven
 headers plus CSP listed above on both ports. Install paths differ from R1.03 (here
 `C:\Yokogawa\CIServer`), so always use the `TLS_*` variables.
+
+## R1.05: the CSP blocks external pages in displays (verified 2026-10-09, ISS-111)
+
+Tested with a temporary display holding two web browser components on the R1.05 test server
+(removed afterwards). The web client received `Content-Security-Policy: script-src 'self'
+'unsafe-eval' 'unsafe-inline'; img-src 'self' data:; default-src 'unsafe-inline' 'self';
+font-src 'self' data:` and `X-Frame-Options: sameorigin`. With no `frame-src` rule,
+`default-src` applies: the browser refused to frame `https://example.com/` (a
+`securitypolicyviolation` event for `frame-src`), while a page from the CI Server itself
+loaded. So on R1.05 a display with an external web page (a dashboard, a camera, a vendor page)
+stays empty in the browser.
+
+**Fix (verified 2026-10-09 on the R1.05 test server):** allow the external host for frames in
+`jwuiisg.sup`, *Security* tab, one `CSP_ENTRY` line per value after the installed ones:
+
+```
+CSP_ENTRY = frame-src, "'self'"
+CSP_ENTRY = frame-src, "https://<allowed host>"
+```
+
+Keep `'self'`, otherwise pages from the CI Server itself are blocked in frames too. The web
+server `JWUIISG` (started by `user_start.cmd`) reads the file only at start: the change takes
+effect after a CI Server restart (needs administrator rights and disconnects all operator
+clients). Then the header contains `frame-src 'self' https://<allowed host>`, and the test page
+showed inside the display with no CSP violation. List only the hosts you need; to undo, remove
+the lines and restart again. The desktop Operator Interface (JCEF browser) is not affected by
+these headers (not tested).
+
+**Who loads the framed page.** In the web client the page in a web browser component is fetched
+by the viewer's own browser, not by the CI Server. So besides the `frame-src` entry, the target
+site must accept requests from every machine that opens the web client: a site that only admits
+the CI Server's address (IP allowlist) answers 403 to the viewers and the frame stays blank or
+shows an error, although the same display works in the Operator Interface on the CI Server
+(there the browser runs on the server). Check from a viewer PC with `curl -I <url>`. The target
+must also not forbid framing (`X-Frame-Options` or its own CSP `frame-ancestors`). Seen on the
+R1.05 test server 2026-10-09: 200 from the server, 403 from another PC.

examples/CI-Eng-Sample/README.md

@@ -225,7 +225,7 @@ fill any monitor (slightly stretched where the ratio differs); maximise the wind
 the taskbar. The web client does not zoom displays: use full screen (F11) and the browser zoom
 (estimates, not tested: about 100 % at 1920 x 1080, 80 % at 1536 x 864, 70 % at 1366 x 768).
 
-Known limits (R1.03.00): the trend draws no line in the browser (a web trend needs 50 pens,
+Known limits (R1.03.00; on R1.05 the web trend draws with 2 pens, verified 2026-10-09): the trend draws no line in the browser (a web trend needs 50 pens,
 ISS-041; the 2-pen trend keeps the desktop hairline box readable); the empty part of the alarm
 lists stays white; a tab opened by clicking the tab strip itself keeps its zoom until it is opened
 once from the toolbar, menu or F1–F6.

knowledge/issues.md

@@ -60,7 +60,7 @@ development system (see "Test system" in `progress.md`); they do not exist on ot
 | ISS-038 | 2026-10-01 | HISTORY (`ithloahis` + rollover) | An `ithloahis` sample that was dropped (dated 11:50, before the active unit) still became the **initial value** of the next unit: after a forced rollover at 12:05:26 `ITEM_HISTORY` shows `CI-Eng-Sample.TANK1.INFLOW` = 95 (`INITIAL_VALUE` 1) although the item's value was 112. History after loading old samples can therefore show a wrong value at the next rollover. | closed | Retested 2026-10-01 after a CI Server restart (first unit 18:05:46). (a) Sample dated one day earlier (95), live value 112, forced rollover: initial value 112 — correct. (b) Sample dated 18:00 (96, a few minutes before the first unit), live value 113, forced rollover: initial value **96** — wrong again; the live item value stayed 113. So a dropped sample dated shortly before the first unit (same day) becomes the next unit's initial value; a much older one did not. Also found: a forced rollover within 2 minutes of the previous one is refused (`DSI-E-ROLLDONE`). Documented as a caution; behaviour confirmed, ready to close. Closed 2026-10-01 (confirmed by user). | `.claude/skills/system-management/tasks/load-history.md`; `knowledge/manuals/IM36K10C40-01EN.md` §3 |
 | ISS-039 | 2026-10-01 | HISTORY (setup) | Installed vs manuals: `hisdbg` menu runs to option 22 (manual text: `-1 - 10`, list to 22) and lists history types 4 (`STATION_STAT`) and 36 (`SYS_LOG`) not in IM 36K10L20 §3.1; `ithsag.sup` keyword `run_interval` (manual: *Heartbeat*) and `queue_size` 500 KB (manual default 200); the option-type table in IM 36K10L20 §3.1 is garbled in the PDF (observed: Scan/Time `1 1`, Event/Item `2 2`, Aggregation `4 4`). | closed | Installed software is the reference (standing user decision). Close when the user confirms. Closed 2026-10-01 (confirmed by user). | `knowledge/manuals/IM36K10L20-01EN.md` §3; `knowledge/manuals/IM36K10C40-01EN.md` §2 |
 | ISS-040 | 2026-10-01 | HISTORY (aggregation) | Aggregation group `CIENG_AGG` (30 min + hour, `TANK1.LEVEL` max/min/avg) ran (`ithsag.log`: *Aggregation Completed*) but stored no values: retrieval gave `0x09 = ITM error` per period. `TANK1.LEVEL` was in `CIENG_EVENT` and `CIENG_SCAN10S`, both priority 0. Also `INTERPOLATION = "30 minutes"` is refused by `dssqld`; the installed name is `30Minutes`. | closed | Closed 2026-10-01 (confirmed by user). 2026-10-01 14:02: after `CIENG_SCAN10S` got `PRIORITY` 10, the 13:30–14:00 period stored max 77, min 33, avg 52.7, quality 1000 (`ithdbg` 20 and `dssqld` with `INTERPOLATION = "30Minutes"`). Cause: equal source priorities (C40 §2.1 says the highest-priority group is the source, but not that a tie gives nothing). Sample fixed (priority 10). The hourly value for 13:00–14:00 was not stored (first half had no source); not rechecked. Proposed close. | `.claude/skills/history-management/tasks/storage-groups.md` §4 (done); `knowledge/manuals/IM36K10C40-01EN.md` §3 (done); `examples/CI-Eng-Sample/03_his_group_df.qli`, `README.md` (done) |
-| ISS-041 | 2026-10-01 | GRAPHICS (HTML trend) | In the HTML display (`localhost:8080/mobileoperator/?d=CIENG_Tank`) the trend shows the pen legend `CI-Eng-Sample.TANK1.LEVEL [CIENG_SCAN10S]` and time axis but draws no line, although `ITEM_HISTORY` has 420 samples in the shown hour. Browser console: `Mismatch between number of labels (Time,CI-Eng-Sample.TANK1.LEVEL [CIENG_SCAN10S]) and number of columns in array (51)`. The trend has 4 further empty pens. 2026-10-01 later: the trend also had the property `chart.attribute[00]` connected to `TANK1.LEVEL` (added by mistake with the pen); the Operator Interface (desktop) showed *Short attribute name ( 61.0) is invalid*. After removing it the desktop trend draws the line, but the HTML trend still logs the mismatch error. | closed | Tried 2026-10-01 (fresh session after a restart, 283 history samples in the hour): removing the 4 empty pens, and `updating` true / `updateInterval` 10 like the factory `AOG_TrendOpen` — the mismatch error and the empty trend stayed in both cases (changes reverted). Still to try: a Micro Trend, the HTML-supported trend properties (IM 36K10R30 §4.8.7), clearing the browser/`MO_CACHE_DISPLAYS` cache (the console shows `CIENG_Tank.xml` *loaded (from cache)*), and adding the pen to the factory *Open Trend* display in the HTML client. **Cause found 2026-10-02** (trend lab `CIENG_TrendLab`): a web-client defect, not a display setting. `DataSource.refresh()` in the web trend code (`mobileoperator\src\…\charts\trend\datasources\DataSource.js`, same in the served `src\lib\fasttools.min.js`) numbers **all 50** internal pen slots (`PEN_COUNT_LIMIT`; the filter for empty/hidden pens is commented out), so each data row has 51 columns, while the dygraph labels only list visible pens with an item. Proof: a 50-pen test display drew normally in the browser. Ruled out on the way: the `?historygroup` suffix, empty pens, `optimised`. **Workaround** (verified on the web): pad each trend to 50 visible pens with `displays/add_trend_spares.ps1` (spares scaled out of view, blank unique legend texts); sample `CIENG_TrendLab` uses it. Alternatively a Micro Trend (ISS-055). Report to Yokogawa. Close when the user confirms. Closed 2026-10-02 (confirmed by user). | `.claude/skills/graphics/tasks/trend.md` (done); `create-display.md`, `deploy-displays.md` (done); `knowledge/manuals/IM36K10R30-01EN.md` §4 (done) |
+| ISS-041 | 2026-10-01 | GRAPHICS (HTML trend) | In the HTML display (`localhost:8080/mobileoperator/?d=CIENG_Tank`) the trend shows the pen legend `CI-Eng-Sample.TANK1.LEVEL [CIENG_SCAN10S]` and time axis but draws no line, although `ITEM_HISTORY` has 420 samples in the shown hour. Browser console: `Mismatch between number of labels (Time,CI-Eng-Sample.TANK1.LEVEL [CIENG_SCAN10S]) and number of columns in array (51)`. The trend has 4 further empty pens. 2026-10-01 later: the trend also had the property `chart.attribute[00]` connected to `TANK1.LEVEL` (added by mistake with the pen); the Operator Interface (desktop) showed *Short attribute name ( 61.0) is invalid*. After removing it the desktop trend draws the line, but the HTML trend still logs the mismatch error. | closed | R1.05 (2026-10-09): fixed on the web client, see ISS-096. Tried 2026-10-01 (fresh session after a restart, 283 history samples in the hour): removing the 4 empty pens, and `updating` true / `updateInterval` 10 like the factory `AOG_TrendOpen` — the mismatch error and the empty trend stayed in both cases (changes reverted). Still to try: a Micro Trend, the HTML-supported trend properties (IM 36K10R30 §4.8.7), clearing the browser/`MO_CACHE_DISPLAYS` cache (the console shows `CIENG_Tank.xml` *loaded (from cache)*), and adding the pen to the factory *Open Trend* display in the HTML client. **Cause found 2026-10-02** (trend lab `CIENG_TrendLab`): a web-client defect, not a display setting. `DataSource.refresh()` in the web trend code (`mobileoperator\src\…\charts\trend\datasources\DataSource.js`, same in the served `src\lib\fasttools.min.js`) numbers **all 50** internal pen slots (`PEN_COUNT_LIMIT`; the filter for empty/hidden pens is commented out), so each data row has 51 columns, while the dygraph labels only list visible pens with an item. Proof: a 50-pen test display drew normally in the browser. Ruled out on the way: the `?historygroup` suffix, empty pens, `optimised`. **Workaround** (verified on the web): pad each trend to 50 visible pens with `displays/add_trend_spares.ps1` (spares scaled out of view, blank unique legend texts); sample `CIENG_TrendLab` uses it. Alternatively a Micro Trend (ISS-055). Report to Yokogawa. Close when the user confirms. Closed 2026-10-02 (confirmed by user). | `.claude/skills/graphics/tasks/trend.md` (done); `create-display.md`, `deploy-displays.md` (done); `knowledge/manuals/IM36K10R30-01EN.md` §4 (done) |
 | ISS-042 | 2026-10-01 | GRAPHICS (layouts) | Installed vs `Layouts.readme`: the factory layouts use status line item types `displayName`, `playbackIndicator` and `dateTime` and the commands `reload <frame>` / `reload all`, none of which the readme lists (readme: `statusText`, `userName`, `progresBar`, `graphicsQueueLevel`, `connectionState`); the readme also writes `zooom` for the zoom command (factory files use `zoom`). | closed | Installed software is the reference (standing user decision). Close when the user confirms. Closed 2026-10-01 (confirmed by user). | `.claude/skills/graphics/tasks/layouts.md` §2 |
 | ISS-043 | 2026-10-01 | REPORT (system reports) | IM 36K10C30 App. 1.3 names two system reports `ALM_ATTS_CUR` and `ALM_ATRS_HIS`; the installed reports are `ALM_ATTRS_CUR` and `ALM_ATTRS_HIS`. The other 26 names match. | closed | Installed software is the reference (standing user decision). Close when the user confirms. Closed 2026-10-01 (confirmed by user). | `knowledge/manuals/IM36K10C30-01EN.md` §8 (done) |
 | ISS-044 | 2026-10-01 | REPORT (scheduling) | Behaviour not in the manuals, found by quick load: a generation interval below 10 minutes is refused (`HIS-E-ROLLTOFAST`, the interval is the rollover of the report's storage group); a scheduled report cannot be deleted (`RPT-E-ACTIVE`) until `ACTIVATION_TIME` and `GENERATION_INTERVAL` are cleared; `CORRECT_DAYLIGHT` 0 counts intervals in UTC (06:00 set for January ran at 05:00 in October); a past activation time moves to the next slot - once (modify, past time within the lifetime) a single report labelled with the old time was generated, at insert with an older time none. | closed | Documented as verified behaviour; the one-off generation for a past activation time is not fully understood. Close when the user confirms. Closed 2026-10-01 (confirmed by user). | `.claude/skills/reporting/tasks/define-reports.md` §1, §5, §6; `knowledge/manuals/IM36K10C30-01EN.md` §2; `examples/CI-Eng-Sample/83a_stop_report_df.qli`, `18_report_df.qli` |
@@ -111,22 +111,22 @@ development system (see "Test system" in `progress.md`); they do not exist on ot
 | ISS-089 | 2026-10-08 | INSTALLATION (local groups, R1.05) | On the R1.05 test server (no dual-redundant platform, no IT Security Tool) the local group `RDC_GA_CLIENT` exists with member `CIX_PROCESS`. The Security Guide mentions this group only for the dual-redundant platform (IM 36K01C30 5th ed. §4.9). | closed | Information only: apparently created by the installer; no action. Close when the user confirms. | `knowledge/manuals/IM36K01C30-01EN.md` |
 | ISS-090 | 2026-10-08 | DOCS (CI Server + PRM) | IM 36K01C10 5th ed. §4.1.1 requires PRM R4.06 or later in a note but R4.08 or later in Table 4.1.1-1 (integration code 1901-0302-03-01). | open | Use R4.08 until clarified (from docs; no PRM available). | `knowledge/manuals/IM36K01C10-01EN.md` |
 | ISS-091 | 2026-10-08 | DSS (temporary files) | Each `dssqld` run (exports and quick loads) left a 0-byte `dss_<n>_<id>.tmp` in `%TLS_LST_PATH%`, and loading a class left a `dss_*.tmp` holding the class source (R1.05 test server: 34 files after one session of checks and a sample load/remove). They are not removed by CI Server. | closed | Corrected by ISS-119: not every dssqld run leaves such a file. Test cleanup deletes them: `examples/CI-Eng-Sample/shared/clean_dss_tmp.ps1 -Since <test start>` (0-byte files and files with sample text only). Not checked on R1.03. Close when the user confirms. | `examples/CI-Eng-Sample/README.md` (done); `knowledge/r105-verification.md` (done) |
-| ISS-092 | 2026-10-08 | GRAPHICS (installed files R1.05) | Read-only comparison of the R1.05 graphics files with R1.03 not done (remote commands refused): `Layouts.readme`, factory layouts, DEPLOY structure, `jwuiutl.cmd` and help, `connectrdp.cmd`, mobileoperator files, AOG/symbol lists. | open | Awaiting user verification (`knowledge/r105-verification.md` V5). | `.claude/skills/graphics/tasks/layouts.md`, `deploy-displays.md`; `knowledge/manuals/IM36K10R30-01EN.md` |
+| ISS-092 | 2026-10-08 | GRAPHICS (installed files R1.05) | Read-only comparison of the R1.05 graphics files with R1.03 not done (remote commands refused): `Layouts.readme`, factory layouts, DEPLOY structure, `jwuiutl.cmd` and help, `connectrdp.cmd`, mobileoperator files, AOG/symbol lists. | closed | 2026-10-09 (V5): done - Layouts.readme and components identical; jwuiutl/jwuiged load the JCEF browser component from tls\exe\lib\jcef; connectrdp.cmd present; no factory Layouts-original.xml. Awaiting user verification (`knowledge/r105-verification.md` V5). | `.claude/skills/graphics/tasks/layouts.md`, `deploy-displays.md`; `knowledge/manuals/IM36K10R30-01EN.md` |
 | ISS-093 | 2026-10-08 | GRAPHICS (HTML display enterprise / restrictions) | IM 36K10R30 4th ed. marks enterprise operation as supported on the HTML display (§4.4, §4.7.15 removed, §4.8) and changes §4.10: no more "no automatic reconnect" and "no HTML export from CI View"; new "HIS-TSE not supported on the web". Not in the revision table in that detail. | open | Not tested (no enterprise setup; shared server). | `knowledge/manuals/IM36K10R30-01EN.md` (done); `.claude/skills/graphics/tasks/deploy-displays.md` (done) |
-| ISS-094 | 2026-10-08 | GRAPHICS (`jwuiutl`) | IM 36K10C50 5th ed. §1.5 describes `jwuiutl -m/-M` output as space-separated; on R1.03 it was comma-separated. On R1.03 an export without `-o` wrote into `mobileoperator\operatorInterfaces\<deployment>`, not the current directory as the help says. R1.05 behaviour not checked. | open | `jwuiutl --help` is read-only (V5); a search run only on a non-shared system. | `knowledge/manuals/IM36K10C50-01EN.md` (done); `.claude/skills/graphics/tasks/deploy-displays.md` (done) |
+| ISS-094 | 2026-10-08 | GRAPHICS (`jwuiutl`) | IM 36K10C50 5th ed. §1.5 describes `jwuiutl -m/-M` output as space-separated; on R1.03 it was comma-separated. On R1.03 an export without `-o` wrote into `mobileoperator\operatorInterfaces\<deployment>`, not the current directory as the help says. R1.05 behaviour not checked. | open | 2026-10-09 (V5): jwuiutl --help identical to R1.03; -m output format still unchecked. `jwuiutl --help` is read-only (V5); a search run only on a non-shared system. | `knowledge/manuals/IM36K10C50-01EN.md` (done); `.claude/skills/graphics/tasks/deploy-displays.md` (done) |
 | ISS-095 | 2026-10-08 | GRAPHICS (HTML display login, corrects ISS-074) | IM 36K10R30 §4.4 Table 4.4-1 marks the profile *Layout* as supported on the HTML display in both R1.03 and R1.05; a table-aware extraction shows it clearly. ISS-074's "layout not" came from a garbled text extraction: manual and software agree. | closed | ISS-074 closed by this. Close when the user confirms. | `knowledge/manuals/IM36K10R30-01EN.md` (done); `.claude/skills/graphics/tasks/layouts.md` (done) |
-| ISS-096 | 2026-10-08 | GRAPHICS (web trend 50 pens, R1.05) | Not known whether the R1.05 web client still draws a trend only with 50 visible pens (ISS-041). | open | Check `PEN_COUNT_LIMIT` in the R1.05 mobileoperator chart code (V5) or test on a non-shared system. Workaround kept. | `.claude/skills/graphics/tasks/trend.md` (done) |
+| ISS-096 | 2026-10-08 | GRAPHICS (web trend 50 pens, R1.05) | Not known whether the R1.05 web client still draws a trend only with 50 visible pens (ISS-041). | closed | 2026-10-09: verified on the web with a temporary 2-pen trend display: both pens draw (history and live). Desktop not checked. 2026-10-09 (V5): PEN_COUNT_LIMIT still 50, but DataSource.js re-enables the empty/invisible-pen checks commented out in R1.03 (change e12620) - probably fixed; test on a non-shared system. Check `PEN_COUNT_LIMIT` in the R1.05 mobileoperator chart code (V5) or test on a non-shared system. Workaround kept. | `.claude/skills/graphics/tasks/trend.md` (done) |
-| ISS-097 | 2026-10-08 | GRAPHICS (AOG demo displays) | IM 36K10C60 R1.04 §1.2.2 names `AOG_UAC_Method_Demo`, `AOG_UAC_MethodArg_Call2`, `AOG_OPCUA_Methods`; the R1.03 machine has `AOG_UAC_Method_Demo`, `AOG_UAC_MethodArg_Call`, `AOG_UAC_Method_Call`. R1.05 names not listed yet (the data-access re-check saw `AOG_UAC_Method_Demo`, `…_Call`, `…_MethodArg_Call(2)`). | open | Part of V5. | `knowledge/manuals/IM36K10C60-01EN.md` (done) |
+| ISS-097 | 2026-10-08 | GRAPHICS (AOG demo displays) | IM 36K10C60 R1.04 §1.2.2 names `AOG_UAC_Method_Demo`, `AOG_UAC_MethodArg_Call2`, `AOG_OPCUA_Methods`; the R1.03 machine has `AOG_UAC_Method_Demo`, `AOG_UAC_MethodArg_Call`, `AOG_UAC_Method_Call`. R1.05 names not listed yet (the data-access re-check saw `AOG_UAC_Method_Demo`, `…_Call`, `…_MethodArg_Call(2)`). | closed | 2026-10-09 (V5): R1.05 adds AOG_UAC_MethodArg_Call2; AOG_OPCUA_Methods (named in C60 §1.2.2) is not installed. Installed software is the reference. Part of V5. | `knowledge/manuals/IM36K10C60-01EN.md` (done) |
 | ISS-098 | 2026-10-08 | GRAPHICS (Generic Functions) | IM 36K10C50: *Calculation/Function* renamed *Generic Functions*; new operations Password Check (R1.04; needs login method *Manual CI Server* / *Manual OS* for the Password Check function in `dssana.sup`) and RDP Connect (R1.05, `tls\com\connectrdp.cmd`). | open | 2026-10-09: authorization part done (ISS-148: login lines and allowed methods documented in `login-methods.md`). Not tested (Edit Module and an RDP target needed). Cross-reference in skill `authorization` to be added in its re-check. | `.claude/skills/graphics/tasks/create-display.md` (done); `knowledge/manuals/IM36K10C50-01EN.md` (done); `.claude/skills/authorization` (open) |
 | ISS-099 | 2026-10-08 | GRAPHICS / AUDIT (custom alarm acknowledgement) | IM 36K10C50 R1.04/R1.05 §2.22, §4.12: custom and external acknowledgement properties; reason and approver are written to `AUDIT_TRAIL` fields `APPROVAL_REASON` / `APPROVER`. | open | 2026-10-09: audit part done (ISS-140), alarm task §4.1 added; behaviour still not tested. Not tested. Skill `audit-trail` to mention the fields in its re-check. | `.claude/skills/graphics/tasks/create-display.md` (done); `.claude/skills/audit-trail` (open) |
-| ISS-100 | 2026-10-08 | HISTORY (start scripts) | On the R1.05 test server `history_start.cmd`, `history_stop.cmd`, `item_start.cmd`, `item_stop.cmd` differ from R1.03 (hash comparison). Content not read (remote read refused for this check); probably the extension-script hooks of ISS-121. The L20/L35 summaries still describe the R1.03 start lists. | open | Awaiting user verification (V6). | `knowledge/manuals/IM36K10L20-01EN.md` §1, `IM36K10L35-01EN.md` §1; `.claude/skills/history-management/SKILL.md` |
+| ISS-100 | 2026-10-08 | HISTORY (start scripts) | On the R1.05 test server `history_start.cmd`, `history_stop.cmd`, `item_start.cmd`, `item_stop.cmd` differ from R1.03 (hash comparison). Content not read (remote read refused for this check); probably the extension-script hooks of ISS-121. The L20/L35 summaries still describe the R1.03 start lists. | closed | 2026-10-09 (V6): the four scripts differ only by the extension-script hooks (ISS-121). Awaiting user verification (V6). | `knowledge/manuals/IM36K10L20-01EN.md` §1, `IM36K10L35-01EN.md` §1; `.claude/skills/history-management/SKILL.md` |
-| ISS-101 | 2026-10-08 | HISTORY (`hisdbg`) | `hisdbg` read-only options (1, 20, 6) not run on the R1.05 test server (remote commands refused). | open | Awaiting user verification (V6). | `.claude/skills/history-management/tasks/history-checks.md` |
+| ISS-101 | 2026-10-08 | HISTORY (`hisdbg`) | `hisdbg` read-only options (1, 20, 6) not run on the R1.05 test server (remote commands refused). | closed | 2026-10-09 (V6): hisdbg 1/20/6 work as on R1.03. Awaiting user verification (V6). | `.claude/skills/history-management/tasks/history-checks.md` |
 | ISS-102 | 2026-10-08 | HISTORY (dataset definitions) | `his_group_df`, `item_his_df`, `item_his2_df`, `item_history`, `his_units` definitions are identical in R1.03 and R1.05; only the DSS interface source `dsid_ihis_df.c` changed. No effect on quick-load fields expected. | closed | Information. | `.claude/skills/history-management/SKILL.md` (done) |
 | ISS-103 | 2026-10-08 | HISTORY (storage groups on R1.05) | Storage groups (Event/Item, Scan/Time, Aggregation), `ITEM_HISTORY` reads and aggregation not re-tested on R1.05: a new group needs a CI Server restart (ISS-006), not allowed on the shared server. History setup files are identical apart from licence/instance lines. | open | Not tested; needs a server where a restart is allowed. | `.claude/skills/history-management/tasks/storage-groups.md` (done) |
 | ISS-108 | 2026-10-08 | PORTAL (installation media) | IM 36K10R10 4th ed. §3.1 (R1.04): CI Portal setup runs from the mounted CI Server ISO file instead of the DVD; not in the revision table. §3.3 only gained a reference to IM 36K10L30 ch. 3. | closed | Documented. Close when the user confirms. | `knowledge/manuals/IM36K10R10-01EN.md` (done) |
 | ISS-109 | 2026-10-08 | PORTAL / BUS (`dur.sup`) | R1.05 `dur.sup` has a new switch `gateway_core` (General tab, installed No) and a new adaptive queue set `ADTSTO, 1.00`. IM 36K10R10 does not mention them; see ISS-116 for the gateway configuration. | closed | Installed software is the reference. Close when the user confirms. | `knowledge/manuals/IM36K10R10-01EN.md`, `.claude/skills/portal-setup/SKILL.md` (done) |
 | ISS-110 | 2026-10-08 | PORTAL (`jwuiisg.sup` keywords) | R1.05 `jwuiisg.sup` has keywords IM 36K10R10 §4.3 does not describe: `SERVER_FILE_CACHE`, `HTTP_TO_HTTPS_REDIRECT`, `RECONNECT_TIMEOUT_OVERRIDE`, and a new tab *Access Control* (`RESTRICT_IP_ACCESS`, `HOSTNAME_WHITELISTING`). | closed | Installed software is the reference; documented from the file's own help. Close when the user confirms. | `knowledge/manuals/IM36K10R10-01EN.md`, `.claude/skills/portal-setup/tasks/check-web-access.md` (done) |
-| ISS-111 | 2026-10-08 | PORTAL (web security headers, CSP) | R1.05 `jwuiisg.sup` installs 7 security response headers and 9 `CSP_ENTRY` lines (R1.03: only X-Frame-Options, no CSP); verified in the HTTP responses on 8080/8443. | open | Open question: does the CSP block external content in displays (web browser component, external images, map viewer)? Not tested. Upgraded systems may keep their old settings depending on the merge. | `knowledge/manuals/IM36K10R10-01EN.md`, `.claude/skills/portal-setup/tasks/check-web-access.md` (done); `.claude/skills/graphics` (open) |
+| ISS-111 | 2026-10-08 | PORTAL (web security headers, CSP) | R1.05 `jwuiisg.sup` installs 7 security response headers and 9 `CSP_ENTRY` lines (R1.03: only X-Frame-Options, no CSP); verified in the HTTP responses on 8080/8443. | closed | 2026-10-09: fix verified - CSP_ENTRY = frame-src, "'self'" plus one line per allowed host in jwuiisg.sup, then a CI Server restart (JWUIISG reads the file only at start); the external page then loaded in the display. Close when the user confirms. 2026-10-09: answered with a temporary display - the default R1.05 CSP (no frame-src, default-src self) blocks external pages in a web browser component on the web client; same-origin pages load. Possible fix (not tested): a CSP_ENTRY with frame-src for the allowed host. Open question: does the CSP block external content in displays (web browser component, external images, map viewer)? Not tested. Upgraded systems may keep their old settings depending on the merge. | `knowledge/manuals/IM36K10R10-01EN.md`, `.claude/skills/portal-setup/tasks/check-web-access.md` (done); `.claude/skills/graphics` (open) |
 | ISS-112 | 2026-10-08 | SETUP FILE EDITOR (`jwuiisg.sup` metadata) | R1.05 `jwuiisg.sup` metadata quirks: two keyword blocks end with `!ENDKEYWORD!`; `SERVER_FILE_CACHE=0` without spaces in `!DEFAULT`; `RECONNECT_TIMEOUT_OVERRIDE` has no active or default line; `RESTRICT_IP_ACCESS` has no keyword for the allowed addresses. | open | Awaiting user verification in the Setup File Editor GUI (V7). | `knowledge/manuals/IM36K10R20-01EN.md`, `IM36K10R10-01EN.md` (done) |
 | ISS-113 | 2026-10-08 | SETUP FILE EDITOR (R1.05 GUI) | R1.05 `fsuedit.cmd` only adds `tls\exe\lib\*` to the class path; metadata keywords and `!KIND`s unchanged. The R1.03 GUI findings (ISS-015/016) are not re-checked on R1.05. | open | Awaiting user verification (V7). | `knowledge/manuals/IM36K10R20-01EN.md`, `.claude/skills/portal-setup/tasks/change-setup-file.md` (done) |
 | ISS-116 | 2026-10-08 | BUS / SYSTEM DESIGN (gateway core) | IM 36K10J10 5th ed. has a new §3.2.6 *Gateway* configuration, not in the revision table: a gateway-licensed CI Core has no operator interface (nor do CI Portals / CI View connected to it); switched on with `GATEWAY_CORE` in `dur.sup`; a licence/switch mismatch is logged. IM 36K10L30 does not describe the keyword. | open | Not tested (no gateway licence; needs admin and a restart). | `knowledge/manuals/IM36K10J10-01EN.md`, `IM36K10L30-01EN.md`, `.claude/skills/system-management/tasks/bus-utilities.md` (done) |

knowledge/manuals/IM36K10C60-01EN.md

@@ -60,3 +60,10 @@ Enterprise displays and AOG item/object symbols for enterprise engineering (item
 several servers; locations chosen per symbol).
 
 Not practiced: the sample display uses plain components; AOG symbols need the Edit Module GUI.
+
+## R1.05 installed AOG displays (V5, 2026-10-09)
+
+The R1.05 test server has the same `AOG_*` displays as R1.03 plus `AOG_UAC_MethodArg_Call2`
+(display and HTML export). `AOG_OPCUA_Methods`, named in the 5th Edition §1.2.2, is **not**
+installed (ISS-097). OPC UA method demo displays installed: `AOG_UAC_Method_Demo`,
+`AOG_UAC_Method_Call`, `AOG_UAC_MethodArg_Call`, `AOG_UAC_MethodArg_Call2`.

knowledge/manuals/IM36K10L20-01EN.md

@@ -109,3 +109,8 @@ included in archiving); force rollover of `CIENG_EVENT` closed unit 3,1 and star
 
 Not practiced: archiving and retrieve (no archive device; would write to disk and change the
 archive administration), `hisrecover`, `hiswrn`, running `hisrep` by hand.
+
+## R1.05 start scripts (V6, 2026-10-09)
+
+The R1.05 `history_start.cmd` / `item_start.cmd` (and stop scripts) only add the extension-script
+call `?*_<script>.cmd` (ISS-121); the processes started are the same as on R1.03 (ISS-100).

knowledge/manuals/IM36K10L35-01EN.md

@@ -108,3 +108,8 @@ Time as `29-Apr-14 11:48:17.452`, `29-04-2014 11:48:18.452` or UTC seconds. Prac
 6. Restore the setup values and restart.
 This explains why samples older than the current unit were not stored in phase 1
 (`knowledge/issues.md` ISS-006). From an older CI Server version use `ITHIMPORT` instead.
+
+## R1.05 start scripts (V6, 2026-10-09)
+
+The R1.05 `history_start.cmd` / `item_start.cmd` (and stop scripts) only add the extension-script
+call `?*_<script>.cmd` (ISS-121); the processes started are the same as on R1.03 (ISS-100).

knowledge/progress.md

@@ -53,8 +53,8 @@ screenshot.
 | `data-access` | L45, E20 (large: REST API, OPC UA methods, information model mapper, certificate expiry, extended functions off by default), L50 dataset rename | re-checked (read-only) | 2026-10-08: skill and summaries updated, L45 section numbers remapped. Setup files, datasets, ports and certificates checked; Sample qli files unchanged. New form fields confirmed in the installed form definitions (V3); OPC UA loopback re-tested on R1.05 with the reduced sample load (V4, 2026-10-08), certificate exchange done by the user. **Not tested:** OPC A&E direct alarms, PubSub, imported information model. ISS-080–085. |
 | `equipment` | L41 (IEC 61850, item status, App. 1); IEC 104/61850 drivers moved to `eqt`/`eta` | re-checked (read-only) | 2026-10-08: Modbus datasets, setup files and tools identical to R1.03; EQT family, IEC 61850 report control blocks and upgrade steps added. Sample qli files unchanged. `eqpdbg` main info run on R1.05 (V1); Modbus loopback re-tested on R1.05 with the reduced sample load (V4, 2026-10-08). **Not tested:** IEC 104 / IEC 61850 and the EQT tools (no device). ISS-076–079. |
 | `pytools` (new) | P40 new (R1.04; 2nd ed. layout only) | written (from docs) | 2026-10-09: SKILL.md + 5 tasks (setup and first script, items and history, filter/index, events, modify) and the P40 summary. Verified read-only on R1.05: `dss.pyd` 3.6.1, DSSSDAPY, `dss.sup` routing, *Python Interface* login lines. **Not tested:** every function (no Python on the R1.05 test server, ISS-178). **Awaiting user verification:** V17. ISS-174–181. |
-| `graphics` | C50, C60, R30; unlisted: Generic Functions rename, enterprise on the HTML display, R30 §4.10 restrictions | re-checked (from docs) | 2026-10-08: full diff, skill and summaries moved to R1.05. No display or layout touched on the shared server. **Awaiting user verification:** installed-file comparison, `jwuiutl --help`, web trend pen limit (V5; ISS-092, 094, 096, 097). **Not tested:** enterprise HTML display, RDP Connect, Password Check, custom acknowledgement (ISS-093, 098, 099). |
+| `graphics` | C50, C60, R30; unlisted: Generic Functions rename, enterprise on the HTML display, R30 §4.10 restrictions | re-checked (from docs) | 2026-10-08: full diff, skill and summaries moved to R1.05. No display or layout touched on the shared server. Installed files, `jwuiutl --help`, AOG list and web trend code checked on R1.05 (V5, 2026-10-09); 50-pen problem probably fixed (ISS-096). **Not tested:** enterprise HTML display, RDP Connect, Password Check, custom acknowledgement (ISS-093, 098, 099). |
-| `history-management` | C40 §4.2 (REST API, pyTOOLS; C API dropped); L20, L35 wording only | re-checked (from docs and file hashes) | 2026-10-08: history setup files and dataset definitions identical to R1.03; REST/pyTOOLS cross-linked to `data-access` / P40. **Awaiting user verification:** `hisdbg` read-only options and the changed start scripts (V6; ISS-100, 101). **Not tested:** storage groups, aggregation, `ITEM_HISTORY` reads (restart needed, ISS-103); archive. Note: `tlsdnetapi.dll` (.NET API) is no longer in `tls\exe` on R1.05. |
+| `history-management` | C40 §4.2 (REST API, pyTOOLS; C API dropped); L20, L35 wording only | re-checked (from docs and file hashes) | 2026-10-08: history setup files and dataset definitions identical to R1.03; REST/pyTOOLS cross-linked to `data-access` / P40. `hisdbg` 1/20/6 and the start scripts verified on R1.05 (V6, 2026-10-09). **Not tested:** storage groups, aggregation, `ITEM_HISTORY` reads (restart needed, ISS-103); archive. Note: `tlsdnetapi.dll` (.NET API) is no longer in `tls\exe` on R1.05. |
 | `portal-setup` | R10 §3.1 ISO, §3.3; R20 punctuation only | re-checked (read-only) | 2026-10-08: setup-file reads, web ports 8080/8443, Remote Connect page, security headers and CSP verified on R1.05; new `jwuiisg.sup` keywords and `dur.sup` gateway core documented (ISS-108–111). **Awaiting user verification:** Setup File Editor GUI (V7; ISS-112, 113). **Not tested:** separate CI Portal node, gateway core, setup-file changes (shared server), CSP effect on displays. |
 | `system-management` | J10 §2.9.1, new §3.2.6 gateway (unlisted), §5.1; L30 wording; L50 dataset rename; P30 none | re-checked (read-only) | 2026-10-08: exports, filters, `-f`, `dsschk -e -v`, `durwfp`, `umhman`, `itmval -g`, `itmdbg`, DSS compiler check re-tested on R1.05; `dssqld -i/-r`, `itmval -p` from the sample test (V4). ISS-116–123. **Awaiting user verification:** `ithloahis` (needs the full sample with history), start-script hooks (V8; ISS-121). **Not tested:** monitoring processes, gateway core. |
 | `item-engineering` | C10 §2.2; unlisted: C10 §1.1 Tools menu, string length 200 bytes (C10, G10); G10 §9.2, ch. 14–15 | re-checked (read-only) | 2026-10-08: item/section/sub-item definitions and `itm.sup` identical to R1.03; `ITEM_VAL` has 3 new fields (ISS-126); sample items and sub-items loaded and worked on R1.05 (V4). Blocking and string writes re-tested on R1.05 (V9, 2026-10-09). **Not tested:** G10 ch. 14–15 (no CENTUM VP, ISS-127). |

knowledge/r105-verification.md

@@ -89,7 +89,9 @@ form below, take a screenshot, and close it with *Cancel*:
 
 If no OPC UA client line exists on the server, steps 3–4 need one: skip them and say so.
 
-### V5. Graphics files (skill `graphics`; ISS-092, 094, 096, 097)
+### V5. Graphics files (skill `graphics`; ISS-092, 094, 096, 097): **done 2026-10-09**
+
+Run by Claude over ssh at the user's request (read-only, temp folder removed). Results in `graphics/tasks/deploy-displays.md`, `layouts.md`, `trend.md` and the C60 summary.
 
 Read-only. Copy `C:\Users\Admin\AppData\Local\Temp\claude\C--Claude-ci-server-engineer\…\scratchpad\gfx\collect.ps1`
 (kept in Claude's scratchpad; it only lists names and copies factory files) to a temporary folder
@@ -99,7 +101,9 @@ mobileoperator file list), then delete the folder. Also search the mobileoperato
 `PEN_COUNT_LIMIT`. Expected: `connectrdp.cmd` present, help as on R1.03, AOG list with
 `AOG_OPCUA_Methods` / `AOG_UAC_MethodArg_Call2`.
 
-### V6. History checks (skill `history-management`; ISS-100, 101)
+### V6. History checks (skill `history-management`; ISS-100, 101): **done 2026-10-09**
+
+Run by Claude over ssh at the user's request (read-only). Results in `history-checks.md`.
 
 `hisdbg`, Enter at the node prompt, then `1`, `20`, `6`, `-1` (no other number). Expected: menu −1…22,
 system groups of types 21, 6, 1058, 36, 4; clients such as ITH*, ALH, ADTSTO, LGHUMH, RPTMAN.
@@ -175,3 +179,16 @@ is removed again afterwards. Scripts: `examples/CI-Eng-Sample/shared/`.
   server store) and the `pkiserver\rejected` folder created by the test were deleted with the
   user's approval. `OPCUAC_PKI_CERTIFICATES_DF` went back from 3 to 1 record by itself: the
   dataset follows the certificate files. The server is back in its original state.
+
+## HMI tests with temporary displays (2026-10-09)
+
+With the user's approval: two temporary displays `CIENG_TEST_TREND` and `CIENG_TEST_WEB` were
+copied into `DEPLOY\displays`, exported to HTML with `jwuiutl -e HTML`, viewed in the web client
+(logged in as an existing password-less user, as the user said), and deleted again; both
+display folders were compared before and after (identical). No existing display or
+`Layouts.xml` was touched.
+- Trend with 2 pens: draws on the web (ISS-096 closed; `graphics/tasks/trend.md`).
+- Web browser component: external pages are blocked by the default CSP, same-origin pages load
+  (ISS-111; `portal-setup/tasks/check-web-access.md`). Fix verified the same day: the user added
+  two `frame-src` `CSP_ENTRY` lines to `jwuiisg.sup` and restarted CI Server; the external test
+  page then showed in the display (temporary display deployed again and removed).