cliu
b85a65250c
Read-only re-check on the shared R1.05 test server plus a diff of the R1.03 and R1.05 manual editions. - installation-security: R1.05 OS list, Defender exceptions, IT security 2.0/3.0, LAPS, automatic configuration merge (jupgutl), PRM chapter, port 34597; setup_check.ps1 gets -Version (default 1.05.00). - data-access: L45 renumbered (new ch. 4 RESTful API), extended OPC UA functions off by default, OPC UA methods (OPCUAC_METHOD_CALL2_DF), Information Model Mapper, ServerConfig.xml in %TLS_SAV_PATH%. - equipment: Modbus unchanged; IEC 104/61850 run as EQT managers (eqtdbg, eqtfrcscn), IEC 61850 report control blocks, upgrade steps. - Issues ISS-076..090; R1.05 notes on ISS-003/008/032/034/061; progress and version-differences updated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
114 lines
7.1 KiB
Markdown
114 lines
7.1 KiB
Markdown
---
|
||
manual: IM 36K10L40-01EN
|
||
title: EQUIPMENT Service Engineering - Utilities
|
||
edition: 4th Edition, Feb. 2026 (R1.05); content unchanged since the 3rd Edition, Sep. 2023 (R1.03): the revision table lists contact information only
|
||
version: R1.05 (first written for R1.03)
|
||
status: from docs; installed programs, setup file and start scripts checked, eqpdbg "Get main info" run read-only on the R1.03 test system (2026-09-30); on the R1.05 test server files and tool menus checked read-only (2026-10-08), eqpdbg not run there
|
||
---
|
||
|
||
# EQUIPMENT Service Engineering - Utilities (R1.05)
|
||
|
||
Three utilities of the EQUIPMENT Service (the equipment managers `eqp<type>` that talk to
|
||
stations). Section numbers refer to the manual.
|
||
|
||
## 1. Forced scan: `eqpfrcscn` (§1)
|
||
|
||
Temporarily scans a group of points faster when a **trigger item** changes, e.g. a tuning tag
|
||
normally read hourly.
|
||
|
||
1. Create `%TLS_ROOT_PATH%\tls\com\eqpfrcscn_start.cmd` that starts
|
||
`%TLS_ROOT_PATH%\tls\exe\eqpfrcscn -n EQPFRCSCN`, and `eqpfrcscn_stop.cmd` that stops it
|
||
with `durstp.exe -msk -t 10 -p EQPFRCSCN`. (The manual's example start line uses
|
||
`-n eqpfrcsrn`, a typo.) On the test system `equipment_start.cmd` calls **every
|
||
`eqp*start.cmd`** in `tls\com`, so the start file makes it start with CI Server.
|
||
2. Define the trigger item; any value change starts a forced scan.
|
||
3. Give the points to be forced a scan type (e.g. 60000 ms) and link them to items.
|
||
4. In `eqpfrcscn.sup` (Setup File Editor; description "Force scanning equipment"):
|
||
- Tab *General*, keyword `FORCE = <trigger item>, <EQP node>, <EQP process name>,
|
||
<slave number>, <I/O type number>, <scan rate number>, <scan period s>, <scan duration s>`
|
||
(repeatable), plus `queue_size` (KB, default 20).
|
||
- Tab *Special events*, keyword `FCX_EVENT = <trigger item>, <node>, <process>, <slave>,
|
||
<period>, <duration>` for STARDOM, DNP3 and IEC101 events.
|
||
- EQP process name = *Equipment process name* of the line; slave number = *Internal
|
||
station id* (or `eqpdbg` "Get slave info").
|
||
- I/O type numbers include 100/101/103/104/106 Modbus (Modicon) reads, 293 Siemens 3964R,
|
||
580 BK8100, 644 STARDOM FCX (-1 slow, -2 fast, -3 medium), 772/774 ProSafe-COM,
|
||
836 FA-M3, 996 AB PLC5, 1028 DNP3, 1092 Siemens S7, 1156 DAQSTATION, 1188 AB CIP,
|
||
1220 Fisher ROC, 1316 HexRepeater, 1636 IEC 61850.
|
||
- Scan rate number: the points' scan interval in ms, or the driver's internal rate number.
|
||
5. Restart CI Server (or the `EQPFRCSCN` process).
|
||
|
||
**R1.04 and later:** IEC 61850 (and IEC 104) lines run under an EQT manager, which
|
||
`eqpfrcscn` does not reach. The forced scan for them is `eqtfrcscn`: its template
|
||
`tls\tpl\eqtfrcscn.tpl` has the same `FORCE` / `FCX_EVENT` / `queue_size` keywords and I/O type
|
||
list, with the EQT node and process as arguments. R1.05 installs no `eqtfrcscn.sup`; an
|
||
`eqtfrcscn_start.cmd` in `tls\com` would start it, because `equipment_start.cmd` runs
|
||
`eqt*start.cmd`. The manual does not describe it (ISS-078; checked from files only, not run).
|
||
Example: a change of the trigger item makes 60 s points scan every 10 s for 600 s.
|
||
Long scan intervals can let an RTU close its TCP socket; keep at least one faster item or
|
||
lengthen the RTU's socket timeout.
|
||
|
||
## 2. Hourly I/O statistics: `eqpiostat` (§2)
|
||
|
||
Stores the I/O statistics per station line every hour (no record when nothing was sent).
|
||
No setup file, no parameters. On the test system `equipment_start.cmd` starts it
|
||
automatically on the host node, and it was running. The manual calls the target a history
|
||
group; it is the dataset **`STATION_STAT`** (fields: time stamp, station, line, time span,
|
||
sends, good answers, bad return code, timeouts, frame errors, bad CRC, retries, line bad).
|
||
**Verified:** `dssqld -e st.qlo -d STATION_STAT` lists one record per station line per hour
|
||
(`NAME` = `<DD-MON-YY hh:00>/<station>/<line>`), e.g. `CIENG_PLC` with `TIMESPAN` (seconds
|
||
counted in that hour), `SENDS` and `GOODANS` 1560/1560. Only stations that actually sent requests
|
||
appear; the first export (no communicating station) was empty (ISS-021). History type 4.
|
||
R1.05 also installs `eqtiostat` for EQT managers, but its start line in `equipment_start.cmd`
|
||
is commented out (checked 2026-10-08); whether IEC 104/61850 stations reach `STATION_STAT` is
|
||
not checked.
|
||
|
||
## 3. Debugger: `eqpdbg` (§3)
|
||
|
||
`eqpdbg [<node> <process>]` then an action number; node 0 = this node, process default `EQP`
|
||
(use the line's equipment process name, e.g. `EQPMDC` for Modbus). Answers can be piped in,
|
||
e.g. read-only main info:
|
||
|
||
```
|
||
printf '1\n-1\n' | eqpdbg 0 EQPMDC
|
||
```
|
||
|
||
| No. | Action | Changes anything? |
|
||
|---|---|---|
|
||
| 1 | Get main info: lines attached, scan interval (tick), scan status, slave count, scans done, line load % | no |
|
||
| 3 | Get slave info: type, name, wanted path, scan status, recover count, scan preset, output method, address gap / max size, per-line status items and message statistics | no |
|
||
| 8, 9, 10, 11, 13, 17, 18, 23 | I/O type, scan rate, item pointer, timing statistics, item, item by id, slave-specific, item ids | no |
|
||
| 4, 5 | Update slave scan status / address gap and max size | **yes**, makes EQP differ from the database |
|
||
| 6, 12 | Delete slave / item signal (EQP only; repair with `dsschk`) | **yes** |
|
||
| 7 | Reset statistics (optionally enable I/O timing) | yes (counters) |
|
||
| 14 | Save all info on disk (optionally stop the EQP process) | yes |
|
||
| 15, 16, 20, 21 | Total scan, force item update, force re-init, general request | triggers I/O |
|
||
| 19 | Logging file size (MB, 0 = off): `<process>.xml` / `_old.xml` in the list folder | yes |
|
||
| -2 | Dump memory (a wrong address crashes EQP) | risky |
|
||
| -1 | Exit | — |
|
||
|
||
Test system: `eqpdbg 0 EQPMDC` main info showed line type 107, both lines attached, 100 ms
|
||
scan interval, 2 slaves, 2 % line load.
|
||
|
||
**`eqtdbg`** (R1.04 and later) is the same debugger for EQT managers: default process `EQT`,
|
||
same action numbers −2…23 (menu strings read from both programs on R1.05, 2026-10-08; not
|
||
run). Use the line's equipment process name, e.g. `EQT850`. Not in the manual (ISS-078).
|
||
|
||
## Installed on the R1.03 test system
|
||
|
||
Many drivers `tls\exe\eqp<type>.exe` (e.g. `eqpmdc` Modbus, `eqpfcx` STARDOM, `eqpfam3` FA-M3,
|
||
`eqp850` IEC 61850, `eqpdnp` DNP3); setup files `eqp*.sup` (e.g. `eqpmdc.sup`, `eqpmqtt.sup`,
|
||
`eqpfrcscn.sup`); start scripts `eqpmdc_start.cmd`, `eqpmqtt_start.cmd`. Running managers:
|
||
`eqpmdc`, `eqpmqtt`, `eqpiostat`.
|
||
|
||
## Installed on the R1.05 test server (2026-10-08)
|
||
|
||
Program and data under `C:\Yokogawa\CIServer`. `eqp104`, `eqp850` and `eqp850dmp` are gone;
|
||
instead `eqt104`, `eqt850`, `eqt850dmp`, `eqtdbg`, `eqtfrcscn`, `eqtiostat`, `etaman` and the
|
||
data servers `eta10464.dll` / `eta85064.dll`. Setup files `eqtini.sup` (licence only),
|
||
`eta.sup` (protocols run by the EQT framework: `iec61850`, `iec104`), `eta104*.sup`,
|
||
`eta850*.sup`, client file `eqt850.icd`; templates `eqtfrcscn.tpl`, `eqtini.tpl`.
|
||
`equipment_start.cmd` starts `etaman` after `epaman` and runs `eqt*start.cmd`;
|
||
`equipment_stop.cmd` stops `eta*` and `eqt*`. Running: `epaman`, `etaman`, `eqpmdc`,
|
||
`eqpmqtt`, `eqpiostat`. Modbus files (`eqpmdc.sup`, `epamdc*.sup`, `eqpfrcscn.sup`/`.tpl`) are
|
||
identical to R1.03.
|