cliu
e26d610e89
V1 eqpdbg main info and V2 setup_check.ps1 run read-only on the R1.05 test server (temporary copy deleted). setup_check.ps1 counted program-limited 'any port' rules (e.g. Remote Desktop Shadow) as allowing the CI Server ports; now only port rules or any-port rules without a program limit count. V3 checked in the installed form definitions. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
87 lines
4.9 KiB
Markdown
87 lines
4.9 KiB
Markdown
# R1.05 verification checklist
|
||
|
||
Two kinds of R1.05 checks are open after the read-only re-check of 2026-10-08:
|
||
|
||
- **Not tested:** the function is not available on the R1.05 test server, so it cannot be
|
||
tested there at all. The content stays "from docs" and is marked **not tested** with the
|
||
reason. Nothing to do until a suitable system exists.
|
||
- **Awaiting user verification:** Claude could not run the step itself (refused as a remote
|
||
command, needs an administrator, needs the GUI). Claude prepared the steps and expected
|
||
results below; the user runs them on the server or in the GUI and sends the output or a
|
||
screenshot, and Claude records the result in the task file and in `progress.md`.
|
||
|
||
All steps below are read-only: they open forms or print information and save nothing.
|
||
Close every form with *Cancel*.
|
||
|
||
## Not tested on the R1.05 test server
|
||
|
||
| Area | Reason | Where marked |
|
||
|---|---|---|
|
||
| IT Security Tool (version 2.0 / 3.0), `CIX_` groups, `CTM_PROCESS`, LAPS, GPO import | Tool not installed; Windows Server 2025 is not supported by the tool | skill `installation-security`, C10/C30 summaries |
|
||
| Vnet/IP drivers, VAGW Bossd | No Vnet/IP card; not supported on Server 2025 | skill `installation-security`, C10 summary |
|
||
| Upgrade from R1.03/R1.04 with the automatic configuration merge (`jupgutl`, `-c` argument) | Fresh R1.05 install, no upgrade to observe; an upgrade test needs a separate machine | C10 summary, ISS-086 |
|
||
| CI Server with PRM | No PRM | C10 summary, ISS-090 |
|
||
| IEC 60870-5-104 and IEC 61850 (EQT managers, report control blocks, `eqtdbg`, `eqtfrcscn`) | No device and no EQT line on the server | skill `equipment`, L40/L41 summaries, ISS-076–079 |
|
||
| OPC A&E `OPXAES_DIR_ALM`, OPC UA PubSub, imported information model | Needs another client/server or extra server instances | skill `data-access`, ISS-085 |
|
||
|
||
## Awaiting user verification
|
||
|
||
### V1. `eqpdbg` main info (skill `equipment`, L40 summary §3): **done 2026-10-08**
|
||
|
||
Run by Claude over ssh at the user's request; output as expected (recorded in the L40 summary).
|
||
|
||
On the R1.05 test server, in a normal command prompt:
|
||
|
||
```
|
||
eqpdbg 0 EQPMDC
|
||
```
|
||
|
||
Type `1` (Get main info), Enter, read the output, then `-1` (Exit). Expected: line type 107,
|
||
the Modbus line(s) attached, scan interval (tick) in ms, number of slaves, line load %.
|
||
Do not choose any other action number. Send a screenshot of the output.
|
||
|
||
### V2. Setup check script (skill `installation-security`, task `setup-check.md`): **done 2026-10-08**
|
||
|
||
Run by Claude (temporary copy, deleted afterwards): 12 OK, 5 CHECK, 20 DIFF after fixing the
|
||
firewall check (see `setup-check.md`).
|
||
|
||
Copy `tools/setup_check.ps1` from this repo to a scratch folder on the server, run it in an
|
||
**elevated** Windows PowerShell, then delete the copy:
|
||
|
||
```
|
||
powershell -NoProfile -ExecutionPolicy Bypass -File setup_check.ps1
|
||
```
|
||
|
||
Expected (from the one-by-one checks of 2026-10-08): CI Server 1.05.00 OK; Windows Server 2025
|
||
Datacenter shown as not in the list; DIFF for firewall domain profile, Defender, automatic
|
||
updates, defrag / component cleanup, page file, .NET 3.5, missing `CIX_` groups; CHECK lines
|
||
for IT security. Send the result table (screenshot or text).
|
||
|
||
### V3. Engineering Module forms (skill `data-access`): **form definitions checked 2026-10-08**
|
||
|
||
Claude has no GUI access to the server. Checked instead in the installed form definitions
|
||
(`tls\wap\cfg`): the main menu has the *OPC UA Information Model Mapper* action (dataset
|
||
`UASERVER_MAPPER_DF`); each user in the project tree has *Add API key* (dataset `API_KEYS_DF`);
|
||
the OPC UA client point form has `READ_NODE_INFO` and `REBROWSE`; the method form has node ID
|
||
type, parent object node ID, manual argument fields and no process-area field. Screenshots of
|
||
the open forms are optional.
|
||
|
||
In the Engineering Module on the server (log on as a user with engineering rights), open each
|
||
form below, take a screenshot, and close it with *Cancel*:
|
||
|
||
1. *Tools › OPC UA Information Model Mapper*: the mapper window opens (shows *New Mapping*).
|
||
2. *Authorisation › Users*, any user: the *Add API Key* function exists (do not create a key).
|
||
3. An OPC UA client point form (*New* on an OPC UA station is enough to see it, then
|
||
*Cancel*): the checkbox *Read additional node information* exists.
|
||
4. An OPC UA client method form: fields for node ID type, *Options* tab (parent object node ID)
|
||
and *Arguments* tab; no process-area field.
|
||
|
||
If no OPC UA client line exists on the server, steps 3–4 need one: skip them and say so.
|
||
|
||
### V4. Needs a decision first: CI-Eng-Sample on the R1.05 test server
|
||
|
||
The sample tasks (Modbus mirror station, OPC UA loopback, items, alarms …) can only be
|
||
re-tested on R1.05 by loading `CI-Eng-Sample` (all names `CIENG*`) onto the shared server. It
|
||
adds records and starts extra equipment processes (`EQPCIENG` on port 5020), but touches no
|
||
other project's records. Load only after the user approves; otherwise these tasks stay
|
||
"verified on R1.03, files checked identical on R1.05".
|